Best Seller

ดอกเจียร์คาร์ไบด์ทรงกรวยคว่ำ

คุณสมบัติสินค้า:

SKU :

ดอกเจียร์คาร์ไบด์ทรงกรวยคว่ำ มีหลายรุ่นให้เลือก YORK Carbide Burrs - Inverted Cone

รุ่น/ขนาด

Share

Carbide Burrs - Inverted Cone

Inverted Cone.
All sizes are nominal. Sizes marked * are 3mm shank, all others are 6mm shank.

Cut Numbers:
Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. 
up to HRC65 hardness.
Please note:
Workpiece and tools should always be steady and well supported.
Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'.
Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
Always ensure that the tool is rated to the recommended operating speed of the burr.

** สามารถดูรายละเอียดครบถ้วนได้จากแคตตาล็อคสินค้า กรุณาดาวน์โหลดไฟล์แนบ PDF เพื่อดูทั้งหมด **

กรุณาเลือกขนาด/รุ่นสินค้าที่ตัวเลือกด้านบน ก่อนคลิกหยิบใส่ตะกร้า

ORDER CODE : YRK-210-9329K

  • Head Size Dia. x L : 12.7 x 12.7 mm CUT 9

ORDER CODE : YRK-210-9489K

  • Head Size Dia. x L : 19 x 16 mm CUT 9


 ** ราคาสินค้าภายในเว็บไซต์อาจมีการเปลี่ยนแปลงโดยไม่ต้องแจ้งให้ทราบล่วงหน้า สินค้าจริงอาจแตกต่างจากภาพในหน้าจอ เนื่องจากการจัดแสงในการถ่ายภาพ การแสดงผลของหน้าจอ และการผลิตในแต่ละล็อตสินค้า ทางบริษัทฯขอสงวนสิทธิ์ไม่รับเปลี่ยน/คืนสินค้า **

เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้